Networking with personal vpn

trendfriendpa

Newbie
Messages
1
Likes
0
Hi

Can anyone give me advise on the following?

Here’s what I’m trying to do:


The red line denotes the VPN connection while the black line denotes a normal internet connection.


Hardware involved:

· Actiontec MI424WR Rev F (Verizon FiOS wireless modem and router)

· Cisco RV180 (wired VPN router)



Connectivity:

· Cell phones connect to both the WiFi and to the native provider networks (best reception preferred mode).

· Laptops will connect either wired to the RV180 or wireless to the MI424WR.

· PCs will connect to wired RV180.

· Servers will connect to wired RV180.



Issues:

· RV180 can communicate with MI424WR (WAN side) and with devices on the LAN side.

· Devices on the LAN side can only communicate with the RV180 and cannot reach the MI424WR and thus have no internet connectivity.

· Devices on the MI424WR can communicate with the WAN of the RV180 and have internet connectivity but cannot communicate with devices on the LAN of the RV180.



Desired Results:

· Full internet connectivity from the RV180 LAN through to the MI424WR and internet.

· Ability of devices on the RV180 WAN/MI424WR LAN to communicate devices on the RV180 LAN and vice versa.

· Ability to connect via VPN through the MI424WR to the RV180 and establish a local presence on the RV180 LAN and be able to communicate with devices as described in previous bullet point.
 

Attachments

  • VPN Schematic.jpg
    VPN Schematic.jpg
    35.1 KB · Views: 1,232
Top