tester with robot and video instruction

user36

Junior member
Messages
11
Likes
0
This completely automatic system!

I have written Video, what plows my system and here is else that: in
my system broker not important!
2 links lead on one and ditto video:
Code:
https://www.sendspace.com/file/lyu7ah
Code:
https://youtu.be/A9p9RxFYHOQ


here is very old terminal (compile only in him)
Code:
https://www.sendspace.com/file/tbrr6q

here is history:
Code:
http://tbf.me/a/tWGa2

sounds to tester and to 2-m robot to copy in file: BROKER_DIRECTORY\SOUNDS\

1.1.
What is a INTERLACING ?
- a mode wickerworks pigtail from sorted variable at start in tester
beside you program on quick searching for from 12-th
point of the switching here is while this program is executed you may
plait pigtails (maximum variable: 6)
for this will carry in INTERLACING importance "1" and will afterwards
enter "1" in __refresh_now
and in variable with prefix _Frozen_, which you have defined for
itself as pigtails, will enter -555 (immediately in all!)
and will afterwards enter "1" in __refresh_now

now ready?
but will now carry in INTERLACING amount of the entanglements for
pigtail with your variable amount perepleteniy=[2...999]
and also if you want to change % not full deployment at the time of
reactions these switching that simultaneously
with entering in "INTERLACING" importances >1, necessary also to carry
in variable GENETIC METHOD STRENGTH [0-Disabled, 1...200]
your new % not full deployment and only afterwards enter "1" in __refresh_now


and wait the performances of the program on switching as of point...
but if in process of the performance of the program, you want, so to
speak - distract tester from main task, that will
enter -10000 in other variable with prefix _Frozen_


if you want to plait else other pigtails, that will first enter -7777
in variable __refresh_now and already afterwards
repeat all with step 1.1.

if you want to look whole program of the switching, which you "have
braided" that will first carry in INTERLACING
importance "0" and will enter "1" in __refresh_now and only afterwards
possible enter -555 in __refresh_now for viewing
of whole program

but this new variable, about which I nothing have not haved time to to tell:
MINIMAL LAG FOR STATIC GAP=200 - for finding Gap without temporary
breakup if you recall my video, that I there wondered
when occurred this most jump of the price USE TRAILING STOP FIRST
[0/1]=0 - sometimes because of it warrant is closed
practically on kopeck USE BUILT-IN PROFIT SEARCH PROGRAMM [0/1]=1 -
use start program for searching for

MG DOUBLE DEFENCE MODE [0/1]=1 - a mode of protection of the protector
(this for mode Martin Gail)


mini-boot "Test_Spread.mq4" for searching for DC with fixed spread
that real could trade in my system you need 'XP but
if simply you want to write teaks and drive them on tester - that any
OS will approach

I enclose the picture of the screen (with server no relationship) on
one vapour(pair):
f7fcc4dc00cd.jpg



Receiver.mq4 little changed: is corrected error - is increased foots:
Swing thence:
Code:
https://www.sendspace.com/file/lnfsqp

here is contents of the file unchangeable parameters CONFIG_GR.txt:
GBPJPY:
LOSS INSPECTION [0/1]=1
STATIC DATA ALLIGMENT IN HOURS [0-Disabled, >0]=500
MAXIMUM OF ORDERS [1...>]=10
CRUSER MODE [0/1]=0
CRUSER MIN DEPO [1...>]=800.00
CRUSER LOT INCREASE=0.03000
CRUSER MAX LOT ZOOM [1...>]=8
CRUSER SAFE AREA IN PIPS [1...>]=6
GENETIC METHOD STRENGTH [0-Disabled, 1...200]=100.0
RECHECK DIRECTION AFTER WAITING [0/1]=1
MIN TPS [0-Disabled, 1...>]=1
MG Engine [0/1]=1
FRIDAY STOP TRADE HOUR [-1, 0...24]=23
MG SURE CLOSE [0/1]=0
TRADE CONTROL [0/1]=1
LOT SIZE IN PERCENT=8.00000
WEEKEND PRE STOP IN HOURS [0...12]=0.2
GAP PRE STOP IN HOURS [0...12]=3.0
MINIMAL LAG FOR GAP=10
BORDER LIMIT LAG [0-Disabled, 1...>]=0
MAX TPS [0-Disabled, 1...>]=0
SPREAD ON YOUR TRADE TERMINAL (0-AUTO)= определить с помощью Info_script.ex4
DIGITS=3
USE LIMIT ORDERS ON RISE [0/1]=1
LIVERAGE [1...>]=100
DIGITS OF LOT=2
ADVANCED GEN CYCLE DEPTH [0-Disabled, >0-Enabled]=9999
START LAG CHECKING [0/1]=0
GENETHIC AUTO INCREASE MODE [0/1]=0
ADDITION SECONDS LIFE OF NOISE PENDING [0...>]=0
USE MEDIUM VALUE WHEN GENETIC MODE STARTED [0/1]=1
SECONDS BORDER FOR GAP DETECTION=30
TRADE CONTROL ZOOM [0...>]=1.17
ENABLE SMART PROFIT SELECTION IN ONE LOOP [0/1]=1
PRICE CONTROL [0/1]=0
ENABLE PLAY SOUND IF PROFIT CONFIG IS FOUND [0/1]=1
ADDITION SECONDS LIFE OF SILENT PENDING [0...>]=0
RANDOM SWITCH IN TO ADVANCED GEN MODULE [0/1]=1
USE BI-DIRECTIONAL PENDING EXECUTION [0/1]=0
SKIP BY DEFAULT VALUE [0/1]=0
PROFESSIONAL MODE [0/1]=0
BALANCE MAXIMAL PERCENT OF LOSS=80.00
START DEPOSIT=800.00
MINIMAL LAG FOR STATIC GAP=200
USE TRAILING STOP FIRST [0/1]=0
USE BUILT-IN PROFIT SEARCH PROGRAMM [0/1]=0
MG DOUBLE DEFENCE MODE [0/1]=1


here is contents of the files sorted parameters TRACER_CFG.txt:
GBPJPY:
SHOW TRACED PROGRESS [0/1]=0
AUTOCONTINUE FROM FILE NZDJPY.CON (Time Period in Seconds) [0-DISABLED, >0]=62
UNUSED=0
UNUSED=0
ENTRY POINTS IN HISTORY DATA [1...20]=9
UNUSED=0
USE FIVE DIGITS [0/1]=1
CHANNEL OLD MIN [1...>]=1000
CHANNEL OLD MAX [1...>]=1000
CHANNEL OLD STEP [1...>]=5
TRADE SHIFT ON TURN-STOP MIN [1...>]=70
TRADE SHIFT ON TURN-STOP MAX [1...>]=70
TRADE SHIFT ON TURN-STOP STEP [1...>]=1
CHANNEL FRESH MIN [0...>]=1000
CHANNEL FRESH MAX [0...>]=1000
WAITING TIME IN SECONDS MIN [1...>]=5
WAITING TIME IN SECONDS MAX [1...>]=5
WAITING TIME IN SECONDS STEP [1...>]=10
CHANNEL FRESH STEP=5
RISE PIPS OLD MIN [3...>]=2
RISE PIPS OLD MAX [3...>]=2
ANALIZE TICK MIN [2...>]=5
ANALIZE TICK MAX [2...>]=20
ANALIZE TICK STEP [1...>]=1
ORDERLIFE ON TURN-LIMIT MIN [0...>]=0
ORDERLIFE ON TURN-LIMIT MAX [0...>]=0
ORDERLIFE ON TURN-LIMIT STEP [1...>]=1
TRAILING STOP MIN [1...>]=30
TRAILING STOP MAX [1...>]=200
TRAILING STOP STEP [1...>]=10
TRAILING STOP FIRST MIN [1...>]=99
TRAILING STOP FIRST MAX [1...>]=99
TRAILING STOP FIRST STEP [1...>]=1
UNUSED MIN [0...99]=0
UNUSED MAX [0...99]=0
RISE PIPS OLD STEP [1...>]=1
MAX LOSS IN DEPOSIT MIN [1...>]=2
MAX LOSS IN DEPOSIT MAX [1...>]=250
MAX LOSS IN DEPOSIT STEP [1...>]=10
ORDERLIFE ON TURN-STOP MIN [0...>]=0
ORDERLIFE ON TURN-STOP MAX [0...>]=0
ORDERLIFE ON TURN-STOP STEP [1...>]=1
TRADE SHIFT ON TURN-LIMIT MIN [1...>]=70
TRADE SHIFT ON TURN-LIMIT MAX [1...>]=70
TRADE SHIFT ON TURN-LIMIT STEP [1...>]=1
ORDER LIFE MIN [1...>]=1000
ORDER LIFE MAX [1...>]=1000
ORDER LIFE STEP [1...>]=1
MG ZOOM MIN [1...>]=1.00
MG ZOOM MAX [1...>]=1.00
MG ZOOM STEP [1...>]=0.02
(PRC)CANDLE WAITING IN SECONDS MIN [0...>]=1
(PRC)CANDLE WAITING IN SECONDS MAX [0...>]=30
(PRC)CANDLE WAITING IN SECONDS STEP [1...>]=1
RISE PIPS MIN [3...>]=2
RISE PIPS MAX [3...>]=2
RISE PIPS STEP [1...>]=1
MG DEPTH IN PIPS MIN [1...>]=20
MG DEPTH IN PIPS MAX [1...>]=250
MG DEPTH IN PIPS STEP [1...>]=1
PERCENT OF CUT MIN [1...>]=50
PERCENT OF CUT MAX [1...>]=50
PERCENT OF CUT STEP [1...>]=1
TRADE SHIFT MIN [3...>]=5
TRADE SHIFT MAX [3...>]=5
TRADE SHIFT STEP [1...>]=1
TRACE METHOD 0-File / 1-Array [0/1]=1

under such (see above) to adjustment tester finds profit through 1-2
hours and moreover get prettier profit in Martin

the advice: after 2-h hours of searching for to change the step of the
change for the following sorted values
and change % not full deployment before 20 here is parameters,
subjecting to change the step (LIVE):
variable TRAILING STOP has got importance for step=1
variable MG DEPTH has got importance for step=1
variable MAX LOSS IN DEPOSIT has got importance for step=1

as this do?
- I shall cite an instance only for variable "TRAILING STOP" (-further
themselves...):
-Press F3 in tester
-in parameter "_Frozen_TRAILING STOP" contribute importance -111
-in parameter "TRAILING STOP" contribute importance 1
-in parameter "__refresh_now" contribute 1 -Press "close"

why exactly in Martin?
- since in him reliable
- in he immediately Locking (s opposite warrant with such- lot) of the
warrant and robot
simply takes out of hot griddle roasted patty - as soon as has removed
one patty,
- that system immediately places there another and etc. (I a little
was not touched!)

that else wanted to say:
if you want to change the testable vapour(pair) for tester, that do following:
- do not do so, as I have shown in video-instructions since this long!
- see upwards this subject - there there is contents 2-h files parameter
-change exchange vapour(pair) at the beginning initially 2-h files
-change parameter DIGITS=(here or 5, or 3{for JPY-combination})
-change parameter SPREAD ON YOUR TRADE TERMINAL (0-AUTO)=
-see current Spread with Info_script.ex4 and insert here ^^^

-so it is necessary to test all pair(vapour)s!
-how much it is necessary histories - 15-20 days (For Martin it is
necessary much histories)
 

Attachments

  • MQL4-Sources2_ENG.zip
    355.3 KB · Views: 231
It's simply lost in translation
Unfortunately google translate doesn't do Gibberish > English yet.
 
did anyone here really catch what the video all about, hardly undestand what these tester really is.
my guess these are collecting data feed upon market price.. and .. I dont know.. lol.
 
Top